Ciseco XRF programming/test jig

The Ciseco XRF is a CC1110F32 module with the same form factor as the XBee. It’s cheaper than an XBee and is completely reprogrammable.

But, the XRF doesn’t feature a standard connector for programming. So, here’s a single sided programming/test jig users can etch at home (or you can buy something similar).

There’s a single LED on P2_3, a serial port on P0_2/P0_3 and nothing else.

I’m making the project files available as I’ve created a custom Eagle CAD footprint for the XRF with the CC1110F32 pins labelled.

Here are the Eagle files.

(Note, looking down on the board, pin 1 on the programming header is on the bottom right)