For anyone considering buying a DC-K40III laser cutter, this is what you get in the box.

When the cutter arrived, it was well packed.

The laser tube had some padding inside the case. After removing, it was all in good condition.

The laser head was tied securely in place.
Supplied with the machine was an extractor fan and tube, US to UK mains adapters, water pump, software and dongle.

The front panel has a potentiometer to set the laser power. When it fires, the meter reflects the pot.

The controller board is for Moshidraw.

The laser power supply (the laser is enabled through an optocoupler at the bottom right of the picture)

The motors and controller board are powered from a 24V PSU.